Chuck for primer pocket uniformer?

[Joew]

Are there any brass processing stations with a chuck? Asking because I just bought the 21st Century primer pocket uniformer and am looking for a less manual method than pressing/repressing the button on a cordless drill. Thanks in advance!

 

[Kracken McGraw]

Are there any brass processing stations with a chuck? Asking because I just bought the 21st Century primer pocket uniformer and am looking for a less manual method than pressing/repressing the button on a cordless drill. Thanks in advance!

Somewhere in the archives here in the past there was a foot activated device that you could hook to the drill mounted in a vice.

 

[Joew]

Somewhere in the archives here in the past there was a foot activated device that you could hook to the drill mounted in a vice.

Brilliant. Found that thread and immediately ordered this. Thank you!

Momentary Power Foot Switch

Amazing deals on this Momentary Power Foot Switch at Harbor Freight. Quality tools & low prices.

www.harborfreight.com

 

[wkdickinson]

I just put my Sinclair Primer Pocket Uniformer in my drill press and reduce the speed to about 40% (VFD). Then using my hands, just bump the primer pocket up against the uniformer. Very fast and easy. Once in awhile there will be a case whose primer pocket diameter is a bit too tight and the case will catch and spin. With those you have to get the case off and then more slowly feed it on so the uniformer can cut/burnish the sides of the pocket.

 

[jepp2]

and am looking for a less manual method than pressing/repressing the button on a cordless drill.

I just have to ask. How does a 120V AC switch help with a DC drill motor?

 

[Joew]

I just have to ask. How does a 120V AC switch help with a DC drill motor?

I can put the drill in a vise and use the pedal to turn it on and off. It’s a nice option with aging hands to not have to squeeze the drill button repeatedly.

 

[Chiquita]

Isn't electric drill too fast and too much torque for this operation?

 

[Chiquita]

I have the Hornady version screw driver that works great.

There is also this one from Dewalt. Just attach it to the vice and off you go.