Changing trigger pia

[Link]

What do you use for slave pins in a glued n screwed action? [700 rem trigger in Panda]. Is there a easy way?
thanks

 

[joshb]

Old drill bits.

 

[Danny1788]

1/8” stainless pins from McMastercar super cheap for a bag of 50. What ever length you want

 

[Dusty Stevens]

I have some cut off dowel pins exactly the same length as the trigger body is wide

 

[Link]

OK I got this part figured out, now the next problem. When you work the bolt it doesn't cock the firing pin all the way most of the time. Bolt or trigger? .
thanks

 

[Dusty Stevens]

You need to go thru the trigger adjustment steps to get the sear set

 

[gunsandgunsmithing]

OK I got this part figured out, now the next problem. When you work the bolt it doesn't cock the firing pin all the way most of the time. Bolt or trigger? .
thanks

Start by adding some sear with trigger adjustment...That'll confirm proper trigger function and eliminate more complicated fixes. Has the ignition system been modified in any way?

 

[Link]

I was just looking at the bolt and the end of the firing pin doesn't seem to come out as far as it should. The trigger that we put in is a Hart, new Jewell will be here Friday maybe I will just work with that. I got some practice on this one though. Maybe I will become a smith baaahaa.