It has been asked a number of times and we have been busy in R&D to create a Cant adjustable feature that allows for easy adjustment BUT stays put once locked up
This is the number 1 complaint of bipods with cant adjustment... having to reset during the shooting string... The level of the rifle will change after firing a few shots so the bipod has to be reset.
Well, after going through a bunch of complicated ideas and designs, the final version makes me chuckle with its simplicity, yet wonderful function. Sometimes it is really hard to design... SIMPLE.
And the design has been tested with magnum rifles and the cant stays put even when using big heavy bullets.
Made from Steel and very nicely finished, I expect these parts to offer a lifetime of solid use. No changes have been made to the MPOD itself and existing MPODs can retrofit these parts in a 1 minute. It adds another 0.95oz to the overall weight so no risk to hurting weight limits for shooting sports.
The MPOD with standard legs and the Cant feature weights in a 14oz so still the lightest FTR suitable bipod on the market.
On the rail and the stock level... with many varmint forends, there is plenty of space but if you have a really wide forend, get the 3" MPOD.
[
Just loosen the center lever and the cant adjustment is smooth and very easy.. Tighten back up and keep on shooting.
With the legs completely collapsed, you have ALOT of cant adjustment. You can create even more by extending the legs but then you would likely be rolling down the hill instead of shooting.
5rds test group at 250yds with some Berger 210gr VLDs
A big shout out to the Guys at EGW for again, awesome manf and quality finish. The parts fit exactly as designed and you will have a lifetime of useage.
Jerry
This is the number 1 complaint of bipods with cant adjustment... having to reset during the shooting string... The level of the rifle will change after firing a few shots so the bipod has to be reset.
Well, after going through a bunch of complicated ideas and designs, the final version makes me chuckle with its simplicity, yet wonderful function. Sometimes it is really hard to design... SIMPLE.
And the design has been tested with magnum rifles and the cant stays put even when using big heavy bullets.
Made from Steel and very nicely finished, I expect these parts to offer a lifetime of solid use. No changes have been made to the MPOD itself and existing MPODs can retrofit these parts in a 1 minute. It adds another 0.95oz to the overall weight so no risk to hurting weight limits for shooting sports.
The MPOD with standard legs and the Cant feature weights in a 14oz so still the lightest FTR suitable bipod on the market.
On the rail and the stock level... with many varmint forends, there is plenty of space but if you have a really wide forend, get the 3" MPOD.
Just loosen the center lever and the cant adjustment is smooth and very easy.. Tighten back up and keep on shooting.
With the legs completely collapsed, you have ALOT of cant adjustment. You can create even more by extending the legs but then you would likely be rolling down the hill instead of shooting.
5rds test group at 250yds with some Berger 210gr VLDs
A big shout out to the Guys at EGW for again, awesome manf and quality finish. The parts fit exactly as designed and you will have a lifetime of useage.
Jerry
kumar01@gmail.com] 
