Are there any sites/software that will allow me to cross-apply bullet trajectory based on the calculations from shooterscalculator.com along with the subtension measurements of a BDC reticle?
Scope reticle has holdover marks at 300,400,500,600, and 700 yards, and is "designed for 180 of the most common hunting loads, including the .243, .270, 30-06, and .308". However, since I have the subtensions, and can calculate the trajectory, I should be able to put a sticker on it to the effect of 3=312 yards, 4=417 yards, ect.
I really don't have a place to shoot more than 200 yards, so it's kinda academic and a bit OCD lol, but it would be nice to have a much closer idea of what the lines equate to if I have the chance to shoot longer range, and to see if the marked measurements and actual measurements are close enough or way off.
Scope reticle has holdover marks at 300,400,500,600, and 700 yards, and is "designed for 180 of the most common hunting loads, including the .243, .270, 30-06, and .308". However, since I have the subtensions, and can calculate the trajectory, I should be able to put a sticker on it to the effect of 3=312 yards, 4=417 yards, ect.
I really don't have a place to shoot more than 200 yards, so it's kinda academic and a bit OCD lol, but it would be nice to have a much closer idea of what the lines equate to if I have the chance to shoot longer range, and to see if the marked measurements and actual measurements are close enough or way off.