bushing die ltb..

[25AI260]

guys..

i need a 30Br neck bushing die an the correct size bushing.... does rbcs make one ... where to get... an maybe the best price ?

my brain went dead ... fired case neck is .329 o.d. , .309 i.d wall thickness is .010 ... What size bushing will i need ? ......thinking .326 ??

===
anyone have neck bushing die they need to part with...

thanks..

 

[artbosco]

If you're shooting the 30BR I'd assume your competing with it. If you are, I'd Full Length size for the best results. Go here for the best 30BR bushing die: http://www.harrellsprec.com/ ask for Lynwood.

There's a good refresher on the 30BR and it's capabilities and the best ways to prepare 30BR brass at this link: http://www.accurateshooter.com/cartridge-guides/30br/ and this link: http://www.6mmbr.com/entrekincomp01.html and this link: http://www.6mmbr.com/entrekincaseprep.html

You can purchase standard bushings by a variety of manufactures here: http://www.sinclairintl.com/

I use Carbide because I don't have to worry about lubing necks. Bud Mundy, a very pleasant man to deal with, carries them for $30 ea in all sizes. Here's his contact info:

Bud Mundy
NBRSA Mississippi Valley Region Director
5956 Old Hickory Trail
Hillsboro, MO 63050-3251
phone: (314) 805-1313

The 30BR likes a lot of neck tension. Think: 326, 325, "324", 323.

 

[25AI260]

thanks for the info

i have a rcbs FL & bullet seater non S type

thought i could add to it...