Burris Signature Select Scopes

[reloader243]

Still on the hunt for an affordable higher power scope for 100-1000 yd use,maybe a bit of GH /PD eliminating. A scope I'd not considered in my Quest is the Burris Sig Series Scopes. Anyone have a bit of info from good sources on these scopes? Seems like the dope on them sounds like the Black Diamond but in 1" instead of 30mm. Quality of glass sounds the same. I mount on a 20MOA 1 piece mount and use both Z-sig rings or Warne QD rings, so getting the scope adj to 1000yd should not be an issue.
Was really considering the Bushnell 4200 8x32 as it's near the top of my available budget of $400-$600 range. Just don't have the big bucks for the newer ones coming out in the $700-$800 range..I like the Burris Warranty Any thoughts on these?

 

[Preacher]

I have used a few of the Signature Selects in a 4x16 and they seem to work just fine, I wish they made it with a finer crosshair, and that is the only problem I have with them.
I do have a as new,no ring marks, no nothing) 6x24 Black Diamond with the fine plex, and target turrets that I plan on replacing with another 1242x56 Nightforce as soon as I sell it.

 

[Xracegun]

I have both a signature and black diamond that I used for 1000 yard shooting. The signature has limited adjustments for both vertical and horizontal. I have used the zee rings to compensate for the short coming. I have also tried weaver T36 and they are nice but the mirage can drive you nuts due to the fixed power.