Burris signature rings

[rebs]

How difficult is lining up the inserts in the rings ?

 

[Raythemanroe]

How difficult is lining up the inserts in the rings ?

It's not hard, they are built in away they go together..

Ray

 

[ballisticxlr]

Pretty trivial.

 

[hogpatrol]

The rings are concave. The inserts are convex. They can't move fore or aft and can be lined up in any orientation needed.

Everything you always wanted to know about them:

 

[Shawnba67]

You can turn them sideways for left and right adjustments too.
Took me an hour but first shot out of my deer rifle was 22" from bull at about 10 oclock.
I got with in 1" of zeroed with out ever removing the scope caps.

 

[Bruce W]

Are they available in 30 mm. Does anyone know where to get 30 mm inserts. Thanks, bruce

 

[hogpatrol]

Are they available in 30 mm. Does anyone know where to get 30 mm inserts. Thanks, bruce

They come with two sets of 10s.

 

[Geno C]

The xtr signature rings come in 30 with 0-5-10&20 inserts

 

[ballisticxlr]

Inserts are available at midway. I bought a pack of 30mm inserts so I have all the sizes. Fantastic rings.

 

[Straightshooter1]

The xtr signature rings with the inserts works great for me with my .308 RPR and Vortex Viper. Over 5,000 rounds fired and never a problem.

 

[KY_Windage]

The only inserts you can buy separate from rings are the 1" inserts, at Midway or anywhere else.

I run many sets of these, in both standard 30mm Sig., XTR 30 mm Sig. and XTR 34mm Sig.

I have never lost or destroyed any XTR inserts, and I have other sets in use to rob from if it came to it, so I guess I do not fault Burris for not selling the XTR rings separately.

You will never have a problem with these so long as you occasionally verify that your ring screws remain tight. Not a big deal.

 

[Link]

I wish they made a 30mm to 1'' And no more ring marks with these.

 

[Tommie]

I wish they made a 30mm to 1'' And no more ring marks with these.

Here ya go!
https://www.amazon.com/dp/B00GT5DM9Q/?tag=accuratescom-20

 

[Link]

Here ya go!
https://www.amazon.com/dp/B00GT5DM9Q/?tag=accuratescom-20

Ugh aluminum no thanks. There goes the idea of my scope liking the plastic.

 

[JFW]

Great rings. I quit using NF for these.

 

[Jeff A]

Been using them for years!

 

[waltk]

Burris Signature rings are excellent. They do not mar your scope and hold very well.
Never had a scope slip in them. They are outstanding for lining up your scope with the barrel bore using a bore sighter when there is a large misalignment. But sometimes when you go for the final tightening of the scope caps your correction may be off because of the very slight movement of the inserts. But they are definitely worth the hassle.

 

[Eric Bliss]

If you choose to go with the xtr model they come with several insert sizes that would allow you to make up to an adjustment of ~+/- 40 moa, 20 in one direction on the front added to 20 in the opposite direction in the back, or other combinations with the 0,5, and 10 increments.

 

[rebs]

Thanks again for all the replies.