Burris signature rings?

[TrxR]

Im currently using a set of 1 inch mediums on my 40x with a weaver t36 that I shoot on the bench. I currently have some cheek pressure on the stock to see through the scope. Would the .12 inch difference going to a set of highs make any difference? I would like some extra highs but they only list the for 30mm rings. Is there possibly a convertion insert available?

Thanks

 

[Albany Mountain]

I would think that the difference would be noticeable.

 

[CJ6]

Conversion for the Burris Sig.Zee rings ,no I don't believe so. There are conversions for the Leup. Redfield style or other standard 30mm rings available from Brownells and others but I no experience with them. The ones I've seen advertised were made from Delrin.

 

[rayporter]

you can get a higher base. aim tech makes a one piece base that is about a half inch high. your present burris rings will work with the aim tech base.

a Remington short action takes the ARM-9 base.

 

['Freak]

That little bit of change in height from going medium to high rings has been just enough to work for me when I found I had a bit too much stock stuck to my face. There is still contact but it’s not so much that I can keep track of my pulse rate all the while still just enough to help with stabilization.

 

[Fotheringill]

BKL has a riser that will lift the height by about an inch. Your face will never hit the rifle unless you have Bloodhound jowls.

 

[TrxR]

Those BKL ones wont work as my rifle doesnt have a dovetail , it has weaver mounts and I am using weaver style rings.

Thanks

 

[TrxR]

Would these possibly work? or is the picatinny not compatible?

http://www.weaveroptics.com/rings_bases/tactical/picatinny_riser_set/