Burris rings on a Panda rail?

[Bat Rastard]

Will other brand rings fit a Panda rail?

I am probably fixing to do some scope swapping.
The Panda rail is narrow, and doesn't have slots. What all will fit a Panda?

I am thinking I might have to go with the Burris rings with inserts to compensate for a poorly manufactured Burris scope that the reticle is way off center.

 

[Gman]

Harrels makes dovetail rings for Panda actions.

 

[HTSmith]

https://www.kelbly.com/product/dovetail-to-picatinny-conversion-rail/

I have this on all three of my Pandas and swap scopes in Burris signature zee rings a fair amount. It adds some height so you can use a little lower rings if you like.

 

[Bat Rastard]

https://www.kelbly.com/product/dovetail-to-picatinny-conversion-rail/

I have this on all three of my Pandas and swap scopes in Burris signature zee rings a fair amount. It adds some height so you can use a little lower rings if you like.

That looks like my solution.
Thank you.

 

[Bat Rastard]

Harrels makes dovetail rings for Panda actions.

They make mounts for 11mm and 3/8s rails. The Panda is 11mm correct?

 

[Bugs]

I've used these in the past and they work well.

BKL Technologies - Dovetail to Weaver Picatinny Adaptor Mounts - Made In The USA

The 500 series from BKL - Dovetail to Weaver/Picatinny Adaptor Mounts. Red Dot Scope Adaptors designed to accept all weaver-style scope mounts. Mounts to 3/8-in or 11mm dovetails.

www.bkltech.com

 

[Preacher]

Will other brand rings fit a Panda rail?

I am probably fixing to do some scope swapping.
The Panda rail is narrow, and doesn't have slots. What all will fit a Panda?

I am thinking I might have to go with the Burris rings with inserts to compensate for a poorly manufactured Burris scope that the reticle is way off center.

Burris will fix or replace that scope, if you send it..

 

[ebb]

If you do not have to make weight for a class it will be fine. I have Picatinny rail on my Hall and Burris signature Z rings, and have never had a ring or rail related problem, but they add weight as they are steel.

 

[Bat Rastard]

Burris will fix or replace that scope, if you send it..

Actually, they won't.

Burris Quality control

I bought aBurris 8x40. I like it, but I can't recommend it. The glass is clear enough and I like the features. They manufactured the reticle way off center. I mounted it with cheap rings, and I used ALL of the windage to dial it in. I blamed the cheap rings and bought better rings. The better...

forum.accurateshooter.com

 

[Preacher]

Actually, they won't.

Burris Quality control

I bought aBurris 8x40. I like it, but I can't recommend it. The glass is clear enough and I like the features. They manufactured the reticle way off center. I mounted it with cheap rings, and I used ALL of the windage to dial it in. I blamed the cheap rings and bought better rings. The better...

forum.accurateshooter.com

Toss it in a fire, then send it...

 

[AlNyhus]

They make mounts for 11mm and 3/8s rails. The Panda is 11mm correct?

The Panda rail is 3/8", not 11mm. Be aware that the Picatinny adapter will mark up the top of the rail where the 3 load screws go. I've substituted the supplied screws with Delrin tipped set screws from McMaster Carr. A small bit of lead also works. -Al