Break action single shot (encore)

[jraney]

the 1 i have i started out with 3 barrels 1 in .270 24" ss, did not like it it would not hold groups very well, another 1 in 22-250 finally got rid of it. that barrel also was not very accurate
so i sold it and got a savage mod10 predator with the same scope that was on the encore i am good enough for me at 100yds with factory ammo. i still have the .50cal barrel, a fella's got to have a muzzle loader. but if i could do it over i would have gotten some sort of repeater to begin with.

j

 

[cheek9075]

my 2 cents agian.. i also tried the larger actions pin. it help a little on the accuracy, but made taking it apart a b&^%H. i used a ball started that had a brass end and a hammer.. it was the only way i could get it back out. this makes cleaning and barrel change a problem

 

[Frozentundra]

Check out Mike Bellm's site for info and hinge pins, trigger kits etc. Lots of good info there.
http://www.bellmtcs.com/store/

Also check out the Bergara barrels for the TC's
http://www.bergarabarrels.com/bergarabarrels/break-action-barrels/t-c-encore-and-pro-hunter-rifle-barrels.html

I started out with the Pro Hunter in 270 it shoots about 1 MOA and had bought the 209x50 bbl and forend but then started researching what was all needed to accurize them and just ended up buying a CVA Acccura for about what I had stuck in the BBL & forend and it shoots like crazy and has the best factory trigger I have ever felt.