Body die not sizing close to base, please suggest

[calgarycanada]

I never had a doubt.



If a die is custom made for your Bisley chamber, it's [drum roll] ... a Bisley die!
-

Haha, you won man, a custom die for my chamber would be a Bisley die.

 

[Macropod]

I think you mean reamer/chamber.

I'm not sure why but with chamber opened up a bit, die is sizing case slightly smaller then chamber now hence no more stuck cases[/QUOTE

My mistake. I definitely meant reamer. It had been a long day...

 

[Link]

It is worst than I thought, I still do not believe the case would touch the die. I am sure Link did something but the case was not a 6PPC or the die was not a 30/06.

F. Guffey

Oh my. I made a error it was my 30 br that I used the 30 06 die on to resize the bottom of the case with out touching the shoulder. OLD AGE is setting in.
Link

 

[fguffey]

Oh my. I made a error it was my 30 br that I used the 30 06 die on to resize the bottom of the case with out touching the shoulder. OLD AGE is setting in.
Link

My favorite dies are the short dies with large diameter bodies, more times than not I want to shorten the case length from the shoulder to the case head. Before sizing and forming I run the cases through Steve's page or SAAMI; it saves time. And then my cackelator or my fast math fail me.

F. Guffey

 

[Dolomite]

I sent you a pm regarding the carbide ring die . Let me know if have any questions , it works on all similar base cases , 6 br , 243 , 308 , 30-06 etc .
The die is about $20
Gary

Do you sell these ring dies?

 

[rogina]

My favorite dies are the short dies with large diameter bodies, more times than not I want to shorten the case length from the shoulder to the case head. Before sizing and forming I run the cases through Steve's page or SAAMI; it saves time. And then my cackelator or my fast math fail me.

F. Guffey

Is that so you can bump the shoulder back??

 

[Hohn]

If the brass is still decent, get a $40 Redding SB body die. It will probably work and you may not need it after that brass as done.