Bixn andy BAT M safety issue

[wywindsor]

I have a BAT M octagon 1.47 and a Tac Sport Pro top right safety. The offset is not enough to clear the action. What is the proper fix?

 

[LVLAaron]

I'd guess that most people running that action (myself included) use a trigger with no safety.

 

[BuffaloBill]

I’m not sure if this is relevant, but today I installed a Tacsport Pro X on a Kauger CRSII and found the safety lever interfered with the trigger hanger. I ground the hanger to gain clearance in the arc that the lever sweeps.

In your case, does the lever interfere with the action itself or with a hanger?

 

[SteveOak]

No safety.

 

[STS]

Those triggers will interfere on Remington actions as well. I have two of them, and both did not clear the receiver. I talked with the importer, Bullet Central, and notified them that they needed to communicate the issue with B&A that the safety lever needed to be shaped differently. That's been 18 months ago. It doesn't appear that they have modified the lever. Do not try to bend the safety lever to make it fit. The surface finish is some sort of hardened material and IT WILL CRACK, I promise.

 

[wywindsor]

I called bullet central today. Same story with BNA The action is where it hits. Alex called today we got it figured out. New trigger no safety.