I thought for sure you'd suggest H-1000 because anything else would burn up the barrel!!!H1000 95 grain and up. R-26 but hard to find.
R26, H1000, N160, N165, Maybe H4831SC but it will be slower than the others.
I'll toss out one other option. I recently ran out of my stock of H1000 (my goto for the 115 DTAC's) and had a few pounds of H100V sitting around. Worked up a load of 40gn under the DTAC's with Lapua brass / Fed 210M primers and shot several 1/2moa groups with low SD/ES. Haven't had a chance to see how temp sensitive it is, I suspect it'll be similar to other double base ball powders. So far though, its been promising.
I'll toss out one other option. I recently ran out of my stock of H1000 (my goto for the 115 DTAC's) and had a few pounds of H100V sitting around. Worked up a load of 40gn under the DTAC's with Lapua brass / Fed 210M primers and shot several 1/2moa groups with low SD/ES. Haven't had a chance to see how temp sensitive it is, I suspect it'll be similar to other double base ball powders. So far though, its been promising.
I was just scanning the loads in the .243 forum and noticed Joe Hendricks using N165.How come no N160 loads like Whidden uses?
How come no N160 loads like Whidden uses?