Berger 130vld load data for 6.5x47

[Pigdog]

hi berger lists load data for most 6.5's but I cant find any for this. Does anyone know the min and max loads for berger for 130's for varget and H4350 and the barrel length and temp they used also the velocities they list if possible (I think standard is around 70f for data from the major companies right?) if possible. My barrel is 26inch and I don't want to run loads as hot as a lot of the guys on these forums are.

thanks

 

[cwall64]

hi berger lists load data for most 6.5's but I cant find any for this. Does anyone know the min and max loads for berger for 130's for varget and H4350 and the barrel length and temp they used also the velocities they list if possible (I think standard is around 70f for data from the major companies right?) if possible. My barrel is 26inch and I don't want to run loads as hot as a lot of the guys on these forums are.

thanks

Call them, I just emailed them the other day about a load, and they told me they don't give out in email anymore and to call in. I did and they were happy to tell me the info I needed.

 

[joshb]

I'm working up loads, now. I'll pull my Berger book later and give you the min and max.

 

[dryhumor]

I have a good node at 35gr Varget CCI400, with 130 VLD hunting. Not chrono'd.

 

[jsthntn247]

Around 37.5gr of Varget with a 130

 

[Chuckhunter]

Berger Manual Min / Max for 130 VLD,s

Varget=Min 32 Gr ....Max 35.8
H-4350=Min 35.5Gr....Max39.7

Most of the loads in the Berger Manual, I find to be very conservative but safety is always paramount.

 

[joshb]

Just opened my book but Chuckhunter beat me to it. He is correct! They only mention using a 24 inch barrel and adding or subtracting 24fps per inch of deviation from that.
Varget max velocity:2700
H4350 max velocity:2790

 

[Pigdog]

thanks so much guys just what I need this site is gold.