• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Bat Ds

Prior standard was 0 - 30 with zero facing forward. I would start there and measure firing pin fall.
Measure firing pin fall at this position. From this point on, whichever number you position forward will provide you with that amount of Additional firing pin fall. My notes read: "Firing pin fall should measure between .230" -.250" from cocked to fired position."
 
Last edited:
No less than .230 on a Bat. I prefer more.
So, just for giggles, I tried a 10-20 on one off my BAT B actions with a Jewell one time. The firing pin followed in both positions. I measured pin fall as best I could and it came out close to the .250 number. Don't remember exactly.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,517
Messages
2,197,828
Members
78,961
Latest member
Nicklm
Back
Top