Bart’s BC #’s???

[K Lewis]

Would anyone happen to have a BC# for the Bart’s 105 Gungnirs?

 

[BartsBullets]

.541

 

[ALK]

.541

Now that's coustmer service!

 

[Mark W]

.541

I was about to start a similar thread. How about 80 Grain Boat Tail Dominators?

 

[K Lewis]

.541

Thank you very much, called shop earlier but wife said you were at match and she wasn’t sure.
Thangs again and good luck this weekend.

 

[BartsBullets]

I was about to start a similar thread. How about 80 Grain Boat Tail Dominators?

.330

 

[BartsBullets]

Thank you very much, called shop earlier but wife said you were at match and she wasn’t sure.
Thangs again and good luck this weekend.

Hoping for a good Weekend! Shooting a the East West which is a points match for the World Team.

Bart

 

[ksnyder]

I am building a 6dasher with a 1-7.7 barrel and standard reamer 272 neck 140 freebore. I was wondering what would be the best barts bullet would be the best for me to try. Thank you

 

[djporter]

Hammers!

 

[johara1]

I am building a 6dasher with a 1-7.7 barrel and standard reamer 272 neck 140 freebore. I was wondering what would be the best barts bullet would be the best for me to try. Thank you

Gunguirs, they will work in a .140 FB dasher, maybe too long for the Hammers.... jim

 

[ksnyder]

Ok thank everyone for the input.
I don’t have a lot of time for testing would y’all have any info on where to start the seating on the gunguirs.

 

[BartsBullets]

Ok thank everyone for the input.
I don’t have a lot of time for testing would y’all have any info on where to start the seating on the gunguirs.

Gungnirs

 

[group therapy]

Hammers!

^^^^^YUUP!!!!

 

[rogina]

Roy Hunter makes an awesome 103 grain as well.

I think he just makes the 106's.

 

[Ranger188]

He only makes the 103's now. Dropped the 106

 

[Stan Taylor]

I think he just makes the 106's.

I know Bart an Roy both are making a great 103 grain of different varieties.

 

[johara1]

Ok thank everyone for the input.
I don’t have a lot of time for testing would y’all have any info on where to start the seating on the gunguirs.

In .010 and back out .002 at a time and you will hit it. 31.0 to 31.1 of H4895 will give 2970 to 2998 depending on the barrel after you get a 100 rounds down it. Fire form with 29 gr. of H4895....... jim

 

[dgeesaman]

In .010 and back out .002 at a time and you will hit it. 31.0 to 31.1 of H4895 will give 2970 to 2998 depending on the barrel after you get a 100 rounds down it. Fire form with 29 gr. of H4895....... jim

Maybe your jug of H4895 will do that - not sure mine would. Take care of the powder lot variances, perhaps take the suggested velocity instead of the suggested powder charge from this advice

 

[johara1]

Maybe your jug of H4895 will do that - not sure mine would. Take care of the powder lot variances, perhaps take the suggested velocity instead of the suggested powder charge from this advice

I have 5 different lots and all will work with that or more but only two will shoot. Your free bore is a bigger factor, mine is .125 and with the short ones you may get pressure ..... jim

 

[davidjoe]

Hoping for a good Weekend! Shooting a the East West which is a points match for the World Team.

Bart

Hello Bart, I shoot primarily 7mm, in Fclass, and saw on your website that it says this caliber is coming soon.

With range closures, I’m trying the 190 A-Tip’s tomorrow for the first time at 1,000.

I was curious what your 7mm general plans are? Hornady seems to have gotten some shooters willing to ante the next “node” up for jacketed target bullets.