80 Gr Bart’s in BRA

[Mark W]

What’s a good starting point for Bart’s 80 Grain BT Dominators and 8208 in a zero freebore, 1:12 twist, 6BRA. The brass is already fire formed.

 

[WyleWD]

Start at approximately 31grains with the bullet seated to about .005-.008 into the lands and work up from there. My best shooting with this combination is with a CCI450 primer. You may have to adjust seating depth, but that should get you close. JME. WD

 

[urbanrifleman]

Where is the upper node?

 

[JamesnTN]

Start around 31.0 grains and work up. Mine likes to be seated at .020 into the lands