Barrel Work Phoenix AZ -- Recommended Smith?

[CrackBoom]

Next question for anyone in Arizona. Who do you recommend for barrel work? Thread, chamber, crown, etc?

 

[jeffreybehr]

Lester Bruno. Excellent but normally quite busy.

Firearms Archives | Bruno Shooters Supply

www.brunoshooters.com

Also
GO Precision (Gary Ocock)
15231 W. Gelding Dr
Surprise, AZ 85379
Phone: (623) 398-8337 (9-5 mostly)
Email: onehole149@aol.com

...who did some fine work for me years ago. Gary is listed in this forum's Top Gunsmiths...

Top Gunsmiths

6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma...

www.6mmbr.com

 

[nakneker]

I live in Arizona, Patriot Precision (Show Low) has made three rifles for me, they are all shooters but I’ve also sent many projects out of state. They end up being just as fast. make a few calls and see who has the shortest backlog of the ones you’ll feel comfortable with.

Alex Wheeler with Wheeler Accuracy
Jon Beanland, Beanland rifles
Mike Bryant, Bryant Custom

are three I've used and been super happy with, all hunting rifles. I hear good things about others here too WSMNUT is one who’s name I’m seeing mentioned a lot. Lots of choices. I would caution you not to base your choice on who’s the closest to you, I made the mistake once and learned it pays to do a little research.

 

[ShootDots]

I have been here for over 4 years and Scott Harris has done my work. He has not failed me yet. Scott is also on this forum, under his own name.. He lives in Scottsdale..

 

[Keith Glasscock]

2nd for Scott Harris. Some of the best work I’ve ever seen!

 

[Delfuego]

Next question for anyone in Arizona. Who do you recommend for barrel work? Thread, chamber, crown, etc?

Are you benchrest, hunting, PRS/NRL, general purpose?

Lester Bruno can do benchrest/f-class. For everything else I would use AxisWorks in Tempe. The are good people and do great work.

 

[Buzz]

+1 for Gary O above. He has done a couple small jobs for me. Great to deal with.

 

[Oleg S]

Scott Harris. And he can make excellent dies also.

 

[CrackBoom]

Thanks everyone for all these great options!

 

[Shotgun12]

You might give these guys a call, they did some work for me several months ago, it took about twice as long as they quoted, but there's allot of that going on. They're in TX.​

Tyler Gun Works.

Call Us 806-729-7292.

 

[Maxden]

+1 for Gary O above. He has done a couple small jobs for me. Great to deal with.

Gary did my Benchrest rifle precovid 6 Dasher (Lapua) and bedded the action. Great work great guy to do business with.

 

[Maxden]

I also recommend Alex Wheeler. Excellent work and great guy. He chambered my last 284 Winny Brux barrel

 

[Maxden]

I also recommend Alex Wheeler. Excellent work and great guy. He chambered my last 284 Winny Brux barrel