Barrel making

[BruxBarrels]

Hey some of you have probably seen my page already but some have not. Earlier this year someone posted a video of the rifling machine running at Brux Barrels. I have continued making videos about every step in the process. If you want to see how things are done you can see the videos on my Facebook page https://www.facebook.com/share/1CwrguB8EK/
Or on my youtube page. https://youtube.com/@theliebs?si=jFzqgzxf_MUy0kmy

Also if you guys have any questions regarding Brux Barrels you can direct them to me.

Thanks

 

[swd]

Lots of great videos there!

 

[Fuj]

Also if you guys have any questions regarding Brux Barrels you can direct them to me.

Thanks

What's the lead time now for a custom ??

 

[moondog]

Wife and I Visited your shop several years ago and picked up a couple 30 cal barrels you had on the shelf. Great meeting everyone and got a couple of Tshirts too.
Still have and wear the Tshirts, wish I still had that 30 cal barrel, it shot fantastic!

 

[BruxBarrels]

What's the lead time now for a custom ??

around 6 months for most calibers. some of the calibers larger than 30 cal vary though

 

[ronsatspokane]

That's great. I can watch those videos all day long. Both the barrel making and the fishing.

 

[DP3]

Wife and I Visited your shop several years ago and picked up a couple 30 cal barrels you had on the shelf. Great meeting everyone and got a couple of Tshirts too.
Still have and wear the Tshirts, wish I still had that 30 cal barrel, it shot fantastic!

 

[SKWERLZ]

Brux was the first cut rifled barrel I got and I wasn’t disappointed.

 

[Bill Rodolph]

Customer service is GREAT as well! I had a problem and they took care of it, QUICKLEY!!!

 

[D-4297]

Currently shoot a Brux ; and have another waiting it's turn when this one wears out . I get solid Barrel-life from them , and accuracy remains tight , from the start until they "Go Bad" for "F-Class" TR shooting . Call me a Happy Brux customer .

 

[urbanrifleman]

Hey some of you have probably seen my page already but some have not. Earlier this year someone posted a video of the rifling machine running at Brux Barrels. I have continued making videos about every step in the process. If you want to see how things are done you can see the videos on my Facebook page https://www.facebook.com/share/1CwrguB8EK/
Or on my youtube page. https://youtube.com/@theliebs?si=jFzqgzxf_MUy0kmy

Also if you guys have any questions regarding Brux Barrels you can direct them to me.

Thanks

You guys make great barrels.

 

[jackieschmidt]

I noticed on this video that all of the threads holding the gears in place and securing the back lash bracket were left hand threads.

But then I noticed you watch on your right hand, so I am guessing the video got “flipped” in some way

Anyway, great videos. As one who is in the Machine Shop business, I enjoy watching how other master craftsmen accomplish things.

I am yet to use one of your 30 caliber barrels, but as an avid VFS Competitor, am looking forward to it.

 

[WSnyder]

My latest is a 40cal on a smokeless muzzleloader. It’s shooting great! Got a 224 #4 for a 22CM on the bench that’s up next.

 

[Pirate69]

Hey some of you have probably seen my page already but some have not. Earlier this year someone posted a video of the rifling machine running at Brux Barrels. I have continued making videos about every step in the process. If you want to see how things are done you can see the videos on my Facebook page https://www.facebook.com/share/1CwrguB8EK/
Or on my youtube page. https://youtube.com/@theliebs?si=jFzqgzxf_MUy0kmy

Also if you guys have any questions regarding Brux Barrels you can direct them to me.

Thanks

The videos are both entertaining and informative. I learned a lot for viewing them. Thanks for providing them.

 

[AckAck]

I’ve been following along and really enjoy the videos. Please keep it up.

 

[ORjeff]

I noticed on this video that all of the threads holding the gears in place and securing the back lash bracket were left hand threads.

But then I noticed you watch on your right hand, so I am guessing the video got “flipped” in some way

Anyway, great videos. As one who is in the Machine Shop business, I enjoy watching how other master craftsmen accomplish things.

I am yet to use one of your 30 caliber barrels, but as an avid VFS Competitor, am looking forward to it.

Per the apparent left hand thread... that's probably an artifact from using the cell phone camera that's on the same side as the screen...it inverts the image.

 

[rfwind]

Quantity of one but I'm very well pleased with the .224 x 1-7" twist heavy target barrel on my .223