Autotrickler powder cup guide

[a-dog]

Does anyone here happen to make a 3d printed guide for the glass autotrickler v3 cup? All I need is the small v guide to help center the cup on the scale. I am using a Sartorius Practum scale if that makes a difference. Thanks!

 

[divingin]

Call Adam. He already makes them for the V4.

OTOH, a couple of popsicle sticks cut to length and stuck on with double-sided tape would do the same thing.

 

[a-dog]

Call Adam. He already makes them for the V4.

OTOH, a couple of popsicle sticks cut to length and stuck on with double-sided tape would do the same thing.

That is not a bad idea. Sometimes simplicity is the best route.