AR-10 lower

[Celto]

hi everyone looking for opinions on lowers 80% thinking DPMS but am open thanks!

 

[Dusty Stevens]

So if im decoding this properly you want an 80% lower for an ar10 but are asking if dpms is good? Does dpms even make an 80%

 

[Celto]

apparently from what ive read there are two patterns to go with the armalite series and the DPMS series DPMS having a slight advantage when it comes to parts interchangeability magazine interchangeability and even the AR-15 rifle!

 

[GNERGY]

If you are looking for AR 10 80% lowers, Ghost Guns has some nice ones. I picked up a couple and their fit and finish was real good and they fit tight with my Guntec uppers.
Tarey

 

[Celto]

Thanks will look into them

 

[PatMiles]

If you are going to build an AR-10 do yourself a favor and go with Aero Precision parts. Outstanding quality and everything fits as it should. One stop shopping, no need to chase around for parts. Finished a 6.5 Creedmoor build last year for my 12 year old granddaughter to hunt with. So far, 1 deer and 1 antelope.

 

[Dusty Stevens]

If you are going to build an AR-10 do yourself a favor and go with Aero Precision parts. Outstanding quality and everything fits as it should. One stop shopping, no need to chase around for parts. Finished a 6.5 Creedmoor build last year for my 12 year old granddaughter to hunt with. So far, 1 deer and 1 antelope.

Im a MEGA type guy

 

[Celto]

Thanks

 

[10XSHOOTER]

Yes, Use the DPMS pattern. I built mine that way and parts were plentyful. Used Fulton Armory lower Not a 80%

 

[fireman72]

I've done several 80% 308 lowers and have had great results with Noreen and Broken Armory.

 

[Sam Staton]

I built one using Polymer 80. Everything worked like a charm, and the gun is very accurate. A pleasure to shoot.

 

[GNERGY]

Sam,
I have always wondered about polymer lowers. Did it come molded in tan. How tight was the fit. I know on some aluminum 80% I have put together they have play between the upper and lower and not as tight as I would like it so I ream the pin holes and make my own pins.
Tarey