Applied Ballistics droid app way off

[Billy 30-06]

My Applied Ballistics app for droid has been very accurate and now has become very far off and erratic.
Is there a fix for this problem?
Billy

 

[Delfuego]

Try to kill the app from "settings" in your phone and relaunch it. see it that works.

if not verify the atmosphere and measurements. Mine will occasionally switch to IPHY and killing it resolves this.

 

[Milo 2.0]

Killing it may work, but scan your preferences to see if you changed things up first.
One thing that will skew mine, I can run Enable Zero Atmosphere w/o pressure is absolute, not both.

 

[ballisticxlr]

This is why I advocate printed tables. They never have a temporary failure to output consistent data.

 

[Delfuego]

This is why I advocate printed tables. They never have a temporary failure to output consistent data.

Don't you also sell them

 

[Milo 2.0]

This is why I advocate printed tables. They never have a temporary failure to output consistent data.

So 20th century.

 

[Billy 30-06]

When it works it's within a click accuracy but when it's not it's way off. It works some time and some time not.
I will have to print tables for the different loads. I have one for the 175gr SMK and need to make one for the 185gr Juggernaut.
Billy

 

[Milo 2.0]

When it works it's within a click accuracy but when it's not it's way off. It works some time and some time not.
I will have to print tables for the different loads. I have one for the 175gr SMK and need to make one for the 185gr Juggernaut.
Billy

It really cannot be the app itself, maybe it is downloaded upgrades overriding your settings. There is a saying, garbage in-garbage out, and in a ballistic app, the saying is in one of it's truest forms.
If you want some help, take some screen shots of your input. It may be as simple as checking or unchecking one box.

 

[Billy 30-06]

The problem is coming from a corrupt velocity in the velocity table. It can be dead on or 200 fps high or low.
I believe I may have fixed the problem by removing the powder temp from the ammo data.
Billy

 

[Milo 2.0]

The problem is coming from a corrupt velocity in the velocity table. It can be dead on or 200 fps high or low.
I believe I may have fixed the problem by removing the powder temp from the ammo data.
Billy

Yes, Good job! It is usually something easy.