• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Anyone using H414 or H380 in 6.5x47

just curious if anyone has tried either of these powders can't seem to find any RL 15 and gun doesn't seem to like varget I'm shooting amax 123 in a 8:5 twist 28 inch krieger any help would be appreciated
 
KR -

Howdy !

For info only: In .250-3000 24" barrel, H380 was about ideal under 75gr HPs.

WW760 is another name for H414.

While I have not tried any, IMR4007 oughta be " in the zone "; too.


With regards,
357Mag
 
H380 has produced the best groups so far in both my 6.5X47L with 123 grain bullets. According to Quick Load it is a very good fit and is right there with the most notables on the relative burn rate charts.
 
do you have loading info ( grains.primer etc) using H-380 with the 123 amax... I,m running low with varget ,so that would keep me shooting for a bit till the good stuff shows up..Danny
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,347
Messages
2,217,026
Members
79,565
Latest member
kwcabin3
Back
Top