Anyone try Hybrid 100v in 6.5-284?

[df65284]

Just curious if anyone has tryed the new Hogdon 100v in their 6.5-284. Thinking of trying it in mine, thought maybe someone had some input or load data.

 

[Mudcat]

I tried it in the 6XC and the 6.5Creedmoor,use in the 6.5C) but I didnt try it in the 6.5x284 simply cause I have a load with H4350 that runds 2950fps which is what I think works in my rifle. So I figured no need to try and push for more speed. My bet, however, is that with maybe a bit less powder you will get the same speed or more. And, I didnt want to burn up any more bbl life testing loads in that bbl as I need it to go a couple more seasons!

Someone on here has had to have tried it.

John

 

[Preacher]

I ran it in my 25/284 for a while and got better velocity than the H-4831SC I had been using, and about the same accuracy as long as the temps were about the same..
The stuff seems to be very temperature sensitive to me, and seeing I shoot in it all I went back to H-4831 SC Extreme and the temperature thing went away....
I hate blown primers, and don't like the smell.............
52.4 gr H-4831 at about 3145 fps with a 95 Berger has worked well in temps from 46 to 82 degrees with no problem... unlike HV100.

 

[df65284]

Well if it is temp sensitive then its no good for me. Yotes in the winter and rock chucks in the sopring, dont want to have to work up loads for every season! I have had great luck with 49.3 grains of h4350 and 140 grain Nosler custom competition. It makes nice ragged five shot holes.