Anyone making an aftermarket trigger spring for a Tikka T3x?

[370bc]

Apparently the Tikka T3 aftermarket trigger spring made by Earni the gunsmith does not fit the new model for 2017.
I tried Brownell's, Wolf springs, and Timney. Struck out on all of them. Thanks in advance!

 

[Booger68]

Try a yodave spring, just do a search, he is in Canada

 

[ED3]

Just yesterday I communicated with Ernie regarding using his springs in the trigger of a t3x, and he said they were incompatible.
I then emailed yoDave, and he indicated his Tikka t3 springs worked in the t3x as well.
Given that in every photo I've seen on the web, the t3 trigger appears identical to the trigger in my t3x, and I am lead to believe the triggers did not change with the new model, I'm inclined to believe Yo Dave.

 

[370bc]

K
Thx. Got it!

 

[mikegaiz]

These are really good triggers for newer Sako and Tikka.
http://www.barnard.co.nz/barnard-tikka-trigger

 

[Thauglor]

I used a pack of springs i already had from another project, bought the springs at home depot. Cut one of the correct diameter to the proper length and presto, a reduced pull weight.

 

[Capt. Oblivious]

These are really good triggers for newer Sako and Tikka.
http://www.barnard.co.nz/barnard-tikka-trigger

Nice!

 

[K22]

I have two Tikka's, T3 and the factory triggers are perfect. I have mine adjusted to 2.5 pounds. No creep, crisp pull. I don't know why anyone would want or need an after market trigger if theirs is as good as mine.

 

[mikegaiz]

If you are shooting long range you need a lighter trigger. Ground hogs at 900 yds, Don't knock it if you haven't tried it.