Anschutz Scope Mount Adapter

[AR Shooter]

Am shooting a Weihrauch rifle in my club's NRA smallbore prone matches and would like to mount a scope and give it a try in our 200m silhouette match. Does anyone make an adapter to go from the Anschutz-style rear sight/ring mounting slots (Weihrauch is the same as Anschutz) to a picatinny rail. A flat rail would be OK, but one with 20' of wedge would be ideal. Lots of drop in those rimfire target rounds at 200m. Thanks.

 

[rayjay]

Check out BKL. You could use one of their rails and some Burris Signature Zee rings with offset inserts. If the top of your dovetail is flat you could just use the Burris rimfire rings with inserts.

 

[spclark]

Something like this?

http://www.amazon.com/gp/aw/d/B001CJ67E6

Or:

http://www.amazon.com/gp/aw/d/B002TUSJV6/ref=aw_1st_sims_5/187-3416162-1365019?pi=SY115

- which may accommodate a larger variety of optics.

The Z Rings are a good idea though if you can't find a tapered adapter. Use the +20 insert in back with the -20 in front for 40 total with most scopes.

Good luck!!

 

[AR Shooter]

Thanks.
Ordered the set of BKL individual rails from Pyramid Air so can space the rear up, if needed. Plan to mount my Sightron 8-32X56mm F-Class scope. Hopefully, can space them so don't have to move the rings from my F-Class settings.