Ammo Caddie - TIMER NOTICE: ALARM MODE

[Alexander-M]

First of all, Thank You to all those who purchased Ammo Caddies this weekend at the Berger SWN.

NOTICE
New AMMO CADDIE TIMERS

I just realized that some of the Dual-Function Timers I supply with the Ammo Caddies have an extra display or function, which, as far as I can tell, is neither a timer or a clock.
(EDIT) It is ALARM mode!

Most of the Timers cycle between the Timer and the 24-hr Clock functions by pressing the [Mode] button. While in these functions, the word TIMER or CLOCK is displayed at the top right of the display. See first and second pictures, below.

However, some Timers cycle through a third display that does not show either Timer or Clock, but may sometimes display a small bell icon on the upper left. I have no idea of what may be the function of this blank display. See last picture, below.

These extra-display Timers still work fine; simply press the [Mode] button until the desired word, Timer or Clock is displayed, and bypass the extra blank ALARM display.

I apologize for this inconvenience. But now you have an ALARM as well!

Alex

TIMER


CLOCK (24 hr)


????? <<< ALARM mode >>>

 

[Ned Ludd]

Alarm clock mode?

 

[bcarico]

Stopwatch mode?

 

[Alexander-M]

Alarm clock mode?

YES!!!!!!!!!!!! ALARM MODE

I just tried it.
1) Go to clock mode and set the Clock (if not already set)
2) Go to the blank display, and set the time for the beeper to go off
3) Press [START/STOP] and the display will show a small bell (Alarm is set). See the picture below
4) Go to Clock or Timer mode - Clock mode will show the small bell, Timer will not
When the set Alarm time is reached, regardless of which mode, the beeper will go off.
5) Press Start/Stop to stop the beeper.

Thank you, Greg!!!!

Alex

Alarm set at 15:30 (3:30 PM)