Ammo box for 6 dasher / 6BR

[Dave M.]

Anyone developed a dedicated ammo box for 100 rounds of 6 dasher rounds. I currently use the MTM R-100 but the fired cases are a pain to get out without putting them in upside down. Looking for something better if it exists.
Dave

 

[Kracken McGraw]

https://www.midwayusa.com/product/1564131668
According to old posts, this deluxe MTM box is supposed to work for the 6BR. I think it has the plastic bullet fingers in the bottom that holds the short cases up higher. I got two coming this week for a new 6br build, so we’ll see!

 

[Dusty Stevens]

Put those wood craft blocks in the bottom of each spot. I think it was @urbanrifleman had a good write up on how he did it. I use a bronze brush to snag mine out

 

[Kracken McGraw]

Put those wood craft blocks in the bottom of each spot. I think it was @urbanrifleman had a good write up on how he did it. I use a bronze brush to snag mine out

I looked at those on Amazon, there about $10 for a 120 count now. So figuring in your time gluing all of them in, it may make sense to just buy new.https://www.amazon.com/Wooden-Build...ords=Wood+craft+blocks&qid=1655663623&sr=8-50

 

[urbanrifleman]

I looked at those on Amazon, there about $10 for a 120 count now. So figuring in your time gluing all of them in, it may make sense to just buy new.https://www.amazon.com/Wooden-Build...ords=Wood+craft+blocks&qid=1655663623&sr=8-50

These.

WINGONEER 250PCS Wooden Cubes - 10mm- Wood Square Blocks For Puzzle Making, Crafts & DIY Projects https://a.co/d/1Q8HmNg

8 bucks for 250

 

[urbanrifleman]

It only took me about 10 minutes to glue in 100 blocks.

 

[urbanrifleman]

Here is the thread

MTM 100 case mod for 6BR

I modded my MTM cases for the 6BR. I found a cheap hobby block pack for cheap. A drop of elmers in each hole, drop it in and let it dry. Now the cases are the same height as the 243...

forum.accurateshooter.com

 

[Dusty Stevens]

There you go. Thanks bradley

 

[urbanrifleman]

There you go. Thanks bradley

Use medium CA glue and kicker if you really want to do it fast.

 

[farmerjohn]

Use medium CA glue and kicker if you really want to do it fast.

Been hearing about this new glue and the spray can of activator, you got a link on it by any chance, thanks John

 

[Dave M.]

https://www.midwayusa.com/product/1564131668
According to old posts, this deluxe MTM box is supposed to work for the 6BR. I think it has the plastic bullet fingers in the bottom that holds the short cases up higher. I got two coming this week for a new 6br build, so we’ll see!

I use these today and they are ok but still not as easy to grab fired brass from the

 

[slobhunter2]

Been hearing about this new glue and the spray can of activator, you got a link on it by any chance, thanks John

I have used this with great results

 

[farmerjohn]

I have used this with great resultsView attachment 1348346

Thank you sir, John

 

[Walt Krafft]

J&J ammo boxes. Buy them direct. I have been using them for PPC and BR rounds for a long time.

 

[Dave M.]

J&J ammo boxes. Buy them direct. I have been using them for PPC and BR rounds for a long time.

Do they make a 100 round box for 6BR or dasher?

 

[Dave M.]

J&J ammo boxes. Buy them direct. I have been using them for PPC and BR rounds for a long time.

Jandjproducts.com website no longer works. Anyone know how to find their products??
Dave

 

[Walt Krafft]

Google found some. Try Champions Choice.

 

[JMayo]

I use my cases for different cal rounds. Don't want to glue anything in.

I just put em in case butt up after shooting. The necks aren't damaged at all on any.

I got the 50 count green mtm boxes. They sit by rear rest closer to load port because i have to pick cases out of my Hunter/Varmit rifle action.

Amazon.com: MTM 50 Round Flip-Top Rifle Ammo Box .22-250 to 7.62 X 39, Green : Sports & Outdoors

Amazon.com: MTM 50 Round Flip-Top Rifle Ammo Box .22-250 to 7.62 X 39, Green : Sports & Outdoors

www.amazon.com

I found a zippered case to haul 4 of them..... Finally used something i chose not to throw away !

 

[jobhopper66]

J&J ammo boxes. Buy them direct. I have been using them for PPC and BR rounds for a long time.

The J&J boxes should handle the Dasher case with ease. The phone number on my boxes is 1-800-927-8361. If this is still a good number it should speed things up a little. The item number of the box is BR-100R.

 

[PRR1957]

These are the MTM ammo boxes that I use for 6mmPPC. The cartridge case mouth sits up high enough to easily grab the case mouth to pull out the empty cartridge cases.

Shown left too right is;
6mmPPC
6mmPPC w/bullet
6.5 Grendel
7mmBR Rem.