Alliant power pro 2000mr and quickload

[s1rk1118]

Is this powder in Quickload 3.6? I have v3.5 and have emailed Neco, but no response after 3 days.
Thanks, Steve

 

[Nomad47]

I'm using 4000-MR in a 243 WSSM and I would luv to see it in QL.

 

[TheSnake]

Neither of these powders are in v3.6

 

[jnfphd]

I've got QL 3.6 also, which doesn't have PP2000mr listed. I've added bullets before to the software, and it seems that you can add a powder, providing you know the various specs. Does anyone have the specs for PP2000MR? (Pic attached with sample specs from QL).

 

[rminut]

I chrono'd MR2000 in several .308 and 6br rifles and found that the VV550 data in Quickload gave similar results to the chrono data.

 

[jnfphd]

I chrono'd MR2000 in several .308 and 6br rifles and found that the VV550 data in Quickload gave similar results to the chrono data.

Did you find that load density was same as VV550 or did mr2000 require less fill % for similar velocities?

 

[FroggyOne2]

Not saying that you should try it, but myself and another member of this board, both have had approx the same load in 223 with the 90's and that was 27.0 grs of 2000MR. In my rifle, it was .3 below the achived max pressure for the current temps at that time, which was in low 80's.

 

[rminut]

I chrono'd MR2000 in several .308 and 6br rifles and found that the VV550 data in Quickload gave similar results to the chrono data.

Did you find that load density was same as VV550 or did mr2000 require less fill % for similar velocities?

Yes, the exact same load in Quickload gave me pretty much the exact same velocity seen on the chrony. in 3 different rifles the velocity from Quickload was within 10fps of the chrony.