Alex Wheeler rifle shows off @ DOME @ BART's 105 Hammer

[birdog]

Carlson Reese shot a 3 shot, one inch group at 800 yards Sunday with Junebug's Wheeler Accuracy 6 BR Ackley Improved rifle.
Bat B action
Wheeler LBR stock
Glue - in
Bix ' n Andy
Bart's 105 Hammer

 

[Texas10]

Any truth to the rumor that there were three bus loads of coyotes seen leaving your town this morning?

 

[CaptainMal]

WOW. Super.

Now if I had shot three like that the scorer would rule two and DQ me.

 

[ttfreestyle]

Them Wheeler guns sure will shoot.

 

[Link]

OK I will ask, what was the load :}
Don

 

[birdog]

View attachment 1166149 Them Wheeler guns sure will shoot.

Troy, when did you shoot that 1,000 yd group???

 

[ttfreestyle]

Troy, when did you shoot that 1,000 yd group???

I believe that was shot in late December before I cut fingers off .... That was actually the wife’s orange gun, I tried to steal it but I dont think she is going to fall for that.

 

[Whitehunter]

I believe that was shot in late December before I cut fingers off .... That was actually the wife’s orange gun, I tried to steal it but I dont think she is going to fall for that.

Trying to steal your wifes gun you could lose more than a finger if you know what I mean.

 

[ttfreestyle]

Trying to steal your wifes gun you could lose more than a finger if you know what I mean.

I was hoping she would feel sorry for me now and give in but...... no chance!

 

[Alex Wheeler]

Your wifes guns always seem to shoot. You must just load her the better ammo !!!

 

[ttfreestyle]

Your wifes guns always seem to shoot. You must just load her the better ammo !!!

I’m smart enough to keep the peace at home

 

[birdog]

OK I will ask, what was the load :}
Don

Junebug's load was 4895 under Barts 105 Hammer

 

[Linko]

Junebug's load was 4895 under Barts 105 Hammer

I have a new dasher and plan to use H4895 with 105 Hammers. can you suggest a starting load point for H4895? I am guessing 31 gr??

 

[birdog]

I have a new dasher and plan to use H4895 with 105 Hammers. can you suggest a starting load point for H4895? I am guessing 31 gr??

I think Junebug's load is 31.x, just a tab over 31 gr as I remember

 

[Linko]

I think Junebug's load is 31.x, just a tab over 31 gr as I remember

Appreciate your response. Since there isn't published load data for the 6 Dasher I am being extra careful before I load up some rounds.

I have the new rifle setup for scope leveling, barrel break in & forming the hydroformed lapua brass.

Plan to load 25 Barts 105 with Varget/Rem 7 1/2 and 25 with H4895/CCI450 to shoot this weekend.

Based on your recommendation I will load 5 each 30.6 30.8, 31.0, 31.2, 31.4 H4895

Now I need a recommended range for Varget

thanks all

 

[JamesnTN]

Appreciate your response. Since there isn't published load data for the 6 Dasher I am being extra careful before I load up some rounds.

I have the new rifle setup for scope leveling, barrel break in & forming the hydroformed lapua brass.

Plan to load 25 Barts 105 with Varget/Rem 7 1/2 and 25 with H4895/CCI450 to shoot this weekend.

Based on your recommendation I will load 5 each 30.6 30.8, 31.0, 31.2, 31.4 H4895

Now I need a recommended range for Varget

thanks all

If it were me I’d start at 30.0 and work up. That’s me though.

 

[johara1]

If it were me I’d start at 30.0 and work up. That’s me though.

Without a doubt, lots of H4895 have a big swing..... jim

 

[Linko]

If it were me I’d start at 30.0 and work up. That’s me though.

Great 30 and up it will be. 30.0, 30.2, 30.4, 30.6, 30.8

appreciate a lot, guys

 

[Linko]

Is there a known accuracy velocity window for the Hammers?

 

[Gabe22BR]

2920fps ..???