adg cartrige company.

[maddysdad]

has any of you usedany of thier case for target shooting.?what are your thoughts on them.gary b

 

[Bigguy1951]

They are very good cases. Be sure to heed their warning of backing off on max loads. Work up carefully and you will be very pleased .

 

[rhovee]

Excellent brass. Tough. Consistent. I use it whenever possible.

 

[ShootDots]

I bought 250 for a 7mm Sherman Short Mag. The case necks had to be turned down to 12 thousandths neck wall thickness to fit the chamber cut from my reamer. I weighed the completely prepped cases to see how close they would be. The HIGHEST weight variation for about 25 cases was no more than 3/4 grain! Measuring the shoulders with a Shoulder Bump Gauge from Whidden produced variations of less than 1 thousandths! I have not shot them yet, as my rifle has not been completed. However, Tom Holbrook, a good friend of mine, stated he took one case and started out at a max load for a 7mm SAUM A.I. and slowly went up. At over 1 grain OVER max, he shot it several times and the primer pockets remained as tight as virgin! With these standards, I would think that it is as good as Lapua. However, once I start shooting them, I will determine just how good the brass is! But it is very promising!

 

[Kurz]

I just order another 1,000 pcs. so I'll see what they measure in a week or so.

 

[LA50SHOOTER]

30 Nosler & 338 Edge brass are both Very Good. Uniform thickness @ neck & shoulder datum to case head.

 

[Alex Wheeler]

Its so good I wish they made 6br cases...

 

[shoot4fun]

I have 6.5PRC brass from ADG.
It is not only very nice brass but comes packed 50 rounds to a plastic ammo box that looks like it's bomb proof.
I'll buy more!

 

[LA50SHOOTER]

Waiting on 300 WSM - Hopefully later this year or early 2020 was what I was told by their sales rep. - I believe it will be well received & make the 300 WSM an even more formidable competition cartridge.

 

[ShootDots]

Waiting on 300 WSM - Hopefully later this year or early 2020 was what I was told by their sales rep. - I believe it will be well received & make the 300 WSM an even more formidable competition cartridge.

That would be phenomenal! I hope that info is correct!!

 

[PA Jeep]

Does ADG offer bulk brass without the plastic boxes?