Adding a 20" moa

[Douglas Kiser]

Has anybody run into the problem of determining what size screws are on the top of the receiver of a T-3 , .223, bull barrel to mount a 20" moa rail?

 

[boltman223]

Has anybody run into the problem of determining what size screws are on the top of the receiver of a T-3 , .223, bull barrel to mount a 20" moa rail?

A 20" rail, that's long

 

[Douglas Kiser]

A 20" rail, that's long

I guess I should have said 20" M.o.a. base

 

[ab_bentley]

I guess I should have said 20" M.o.a. base

There is no ". It's scripted 20moa

 

[Skunce]

Has anybody run into the problem of determining what size screws are on the top of the receiver of a T-3 , .223, bull barrel to mount a 20" moa rail?

I have two Tikka T3 rifles a 223 and 243 and they both have 6-48 scope mount screws. Hope that helps.

John

 

[Douglas Kiser]

I have two Tikka T3 rifles a 223 and 243 and they both have 6-48 scope mount screws. Hope that helps.

John

Guy's say they might be 3.5 x.5 metric

 

[Skunce]

Guy's say they might be 3.5 x.5 metric

I just took a look at the EGW web site and they provide 6-48 screws with their bases however they say that Tikkas built before 2004 have 3.5 x .5 metric threads. So it looks like it depends on when your rifle was built as to which size screws yours will use.

John

 

[Douglas Kiser]

I just took a look at the EGW web site and they provide 6-48 screws with their bases however they say that Tikkas built before 2004 have 3.5 x .5 metric threads. So it looks like it depends on when your rifle was built as to which size screws yours will use.

John

Thanks John, had asmith in our club tap them 6 x48