Accuracy international tennon drawing?

[X Count]

Does anyone have a AI tennon drawing? With a measurement over wires would be a bonus!

 

[Jonnyofalltrades]

Good luck!

 

[X Count]

Im sure someone on here has done a barrel for an AI at some point.

 

[GenePoole]

I've got an actual CAD file somewhere, and I'll try to dig it up, but I found this PDF in my photos:

 

[X Count]

Thanks!

Looks to be similar to the other drawing I found.

From what I'm reading, the AE has the same tennon but used a seperate recoil lug like a Remington but .500 thick so the front .500 is unthreaded.

 

[SKWERLZ]

27 or 30mm?


I used to have some better prints
I’ll see if I can find them.

 

[X Count]

27mm

 

[shoot4fun]

Does anyone have a AI tennon drawing? With a measurement over wires would be a bonus!

IIRC, the AW, AT, AXSA and the last AE iteration before discontinuation Used AW action) will all use the same tenon. I am not sure on the ATX or ATXC but the AXMC and AXSA use different specs.
Which are you wanting?
IF I needed any spec for an AI tenon I would ask @DaveTooley .

 

[tobnpr]

Metric tenon and UNEF muzzle threads.
Brits...

 

[LVLAaron]

Metric tenon and UNEF muzzle threads.
Brits...

I also find that a bit humorous.

 

[X Count]

Pretty coarse thread as well.

 

[SKWERLZ]

Pretty coarse thread as well.

I thought so.

 

[GenePoole]

2.0 mm is equivalent to 12.7 pitch.

 

[GenePoole]

Metric tenon and UNEF muzzle threads.
Brits...

I believe the actual AI factory threaded muzzle is M18x1.5.

 

[ik6243]

IIRC, the AW, AT, AXSA and the last AE iteration before discontinuation Used AW action) will all use the same tenon. I am not sure on the ATX or ATXC but the AXMC and AXSA use different specs.
Which are you wanting?
IF I needed any spec for an AI tenon I would ask @DaveTooley .

The AE action has always been the same. The bolt body on all Marks are the same as AWs, just the shrouds on the first two are different. Mk1 had its own magazine, Mk2 and Mk3 use AICS.