About body dies ?

[Doemaster]

I realize this is probably a stupid question to some but in the sinclair catalog there is two different body dies by the same company.My question is which is better for me .I`m just started shooting my new 6BR,it has a .262 neck with a 1-14 barrel and after a couple of reloads it does not come out easily from the wilson die anymore.I plan on ordering a die but would appreciate any feedback .Thanks in advance.

 

[tightneck]

Neither, call Lynwood and get one of his dies. He will need you to send in a couple of your fired cases to match up to your chamber.

Harrell's

 

[Preacher]

+1 on calling Lynwood for one of their FL bushing dies, they are all I use in my 6br's and are worth the $70.00 spent......
Set it up the right way and your problems will soon be solved........

 

[Doemaster]

Thanks called Mr Harrell and talked with him about my problem .Very nice gentleman,a little hard for me to understand .Have sent him a piece of brass,now I just have to wait .Thanks again for the quick replies .

 

[Preacher]

I doubt you'll be waiting for very long

 

[Ogre6br]

How many times fired is considered enough when sending fired brass to a custom die maker like Harrels or similar??

Should the brass be sized at all between firings or just neck sized to enable another firing??

How do you size a neck if you haven't got a FLS or neck die for that caliber yet??
I want to get Harrells to make my 30 BR die but I dont have anyway of resizing the necks for the few times that the test cases need so I can send fired cases to Harrells.

I dont want to buy a 30 BR die for 20 passes of brass at most- before I go to the harrells

Thanks
later
P