• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

A La Carte 6 BRA

64Rambler

Gold $$ Contributor
I just wanted to give a quick shout out to James at Northland Shooters Supply and Brad at The @urbanrifleman. From James, I got an Origin action (almost 3 years ago now and 2500 rounds of 7mm08 later down 2 of his Criterion shouldered prefit barrels) and for this Christmas a new Criterion shouldered prefit in 6 BRA (272 neck, 0.120" freebore). From Brad, also for Christmas, I got one of his Revolution Bench Rest stocks. Add to that a TriggerTech Diamond, an Arken Gen1 EP-5, and a tuner that I made. It took minimum effort to get the recoil lug to fit, and I opened the barrel channel to 1.35" all the way down. The original barrel channel cleared a dollar bill all the way, but I like more room.
I bore sighted at the range - lined up bore with target center, then moved turrets to match the POA. First clean, cold bore shot was at 9 o'clock less than 2" off. Second shot a half inch closer. Adjusted sights and put 2 shots through the same hole! From there I did a powder charge sweep with some unsorted Berger 105 Hybrids. ALL groups were under 1/2"!
The following week I did a powder charge sweep with some slightly sorted Sierra 107 MKs. These bullets were super consistent out of the box, except a couple that were slightly lighter than the average, and 80+% fell within 0.1 gr. I used the lighter bullets to foul and warm up the barrel. Except for the first cold bore shot, I had 2, consecutive 3-shot groups in the 1's. Same charge with the heavier sorted bullets, and they opened up a bit. I tried to measure every way I could, but couldn't figure out what was special about the "lighter" 107 SMKs.
Can't wait to really start dialing in a load.
Thanks for some great products and support here.
Scott
 

Attachments

  • Boresight.png
    Boresight.png
    255.5 KB · Views: 180
  • Screen Shot 2025-02-11 at 7.36.37 PM.png
    Screen Shot 2025-02-11 at 7.36.37 PM.png
    2.9 MB · Views: 168
  • Screen Shot 2025-02-11 at 7.37.16 PM.png
    Screen Shot 2025-02-11 at 7.37.16 PM.png
    2.5 MB · Views: 171
  • Screen Shot 2025-02-11 at 7.37.48 PM.png
    Screen Shot 2025-02-11 at 7.37.48 PM.png
    2.3 MB · Views: 178
Last edited:
It is really AMAZING to see people put together THEMSELVES rifles like these that can perform like this.

I mean, 15 years ago they would have said such a thing would be impossible. The attacks on any thing "prefit" or "not custom" were in full swing. Now, the cat is out of the bag. People know.

My entire store philosophy was based on exactly what this gentleman did. It makes my heart sing.
 
Looks Great!
What Protektor bag and ear spacing did you go with for the Revolution stock,if you don’t mind me asking?
I'll have to check when I get home - I'm not seeing the purchase email from Protektor...
Looks like I got the 1-1/2" ear, 1/2" wide Dr model with handle.
 

Attachments

  • Screen Shot 2025-02-12 at 5.44.57 PM.png
    Screen Shot 2025-02-12 at 5.44.57 PM.png
    3.1 MB · Views: 30
Last edited:

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,788
Messages
2,203,404
Members
79,110
Latest member
miles813
Back
Top