A chassis vs. a stock

[Leo_B]

So basically a chassis is a stock that costs more money because they call it a chassis instead of calling it a stock?

 

[Walt Krafft]

You have not priced many stocks lately.

 

[LVLAaron]

No, not really. Not at all.

 

[bfiles]

All chassiseses are stocks but not all stocks are chassiseses?

 

[tobnpr]

To me, a chassis is aluminum.
Anything else, is a stock.

 

[capitol]

So basically a chassis is a stock that costs more money because they call it a chassis instead of calling it a stock?

Leo_B does the B stand for bitter?

 

[ELR LVR]

A chassis is a more modular piece of equipment, like an AR
and decent stocks are $900 plus, Manners, McMillan, Cerus etc
I see Chassis for $500 - $1000

 

[ELR LVR]

To me, a chassis is aluminum.
Anything else, is a stock.

BZZZZZZT!

 

[Dgd6mm]

So basically a chassis is a stock that costs more money because they call it a chassis instead of calling it a stock?

Ask A.I. Inquiring minds want to know.
All joking aside you can find quite a few chassis's for over $1000.00

 

[DLT]

So basically a chassis is a stock that costs more money because they call it a chassis instead of calling it a stock?

Um no

 

[Rick Richard]

Chassis requires the shooter to carry additional tools to maintain where stocks don’t. My experience anyway.

 

[Cloudrepair]

I have had better experience with chassis

 

[Fuj]

Ask A.I. Inquiring minds want to know.
All joking aside you can find quite a few chassis's for over $1000.00

And A.I. says......Some chassis can be a higher monetary value and even
more money to maintain. This is why most divorce lawyers advise a pre-
nup.

 

[dantiff2]

To chassis or stock.. That is the question... Mr. Gary makes the best chassis!

 

[xr650rRider]

Lock, chassis and barrel just doesn't sound right.

 

[dantiff2]

Lock, chassis and barrel just doesn't sound right.

Does anyone make a chassis for a flintlock yet??? HAHAHA Lock, chassis and barrel...
Keep your powder dry

 

[Kurz]

No information from the post...


Gen 1/Gen 2 RA/SA MoFo Chassis (with choice of fore-end) for Ruger American® short action centerfire rifles and the Glenfield Model A® Short Action Rifles

https://www.indiancreekdesigninc.co...ruger-american-short-action-centerfire-rifles

 

[ShaunBrady]

The camel got its nose in the tent with bedding blocks.....

 

[bfiles]

Well then what do we call a fiberglass or similar “traditional-rifle-shaped action supporting fixture” that has a “mini-chassis” embedded in it?

 

[ShaunBrady]

I was smarting off. I remember Badger bottom metal, an AI magazine, and inletting costing more than some of the early low cost chassis. The adjustable length of pull, comb height, and integral mirage shield provided by an enclosed forend all came for free.

I prefer AR ergonomics to tradition stocks. When I'm on the gun, they all look the same. I still use bedding with factory actions in chassis.