• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

7mm JRS Info?

Seeking Dimensional information on the 7mm JRS. (Reamer Specifications) Mainly Shoulder Width and Height. I can't find any info on Google about this Cartridge. I am in the process of developing My 7mm. Thanks.
 
I would suggest contacting him on Facebook :mad: or by using this information as published:

https://www.whitepages.com/name/John-Robert-Sundra/Waxhaw-NC/rze1a8q

The 7mm JRS is an extended version of the .280 AI since the shoulder is pushed forward, shortening the neck and increasing the case capacity over the standard AI version. This means that you have to first neck up each case then neck it down for actual headspace which is achieved through fireforming. The big three reamer makers should have the print on hand although I did not see it on PTG's reamer list, after a quick scan, for some reason.

Personally, I consider several other cartridges to be as interesting:

7mm Blaser
7x66 SE vom Hofe
7mm RSAUM
7mm-300 Norma Magnum

This is the standard 280 AI case/cartridge dimensions but only the body applies to the JRS, not the shoulder and neck:


upload_2017-10-25_7-12-12.png
 
A similar cartridge could be made by fireforming in the improved chamber the german 7x64.You do not need to move forward the shoulder it is already there.Cases are made by major european factory including RWS,Lapua etc.
Filippo
 
A similar cartridge could be made by fireforming in the improved chamber the german 7x64.You do not need to move forward the shoulder it is already there.Cases are made by major european factory including RWS,Lapua etc.
Filippo
I am aware of this Cartridge. I did a price comparison between the .270, the 30-06, and the 7mmX64 on AMMO SEEK, I sought something less expensive than the .280. The Volume of the 7mmX64 is not at all comparable to the .280AI let alone the JRS, but thanks anyway. I am reminded all the time how the Forums get astray on topic from the original post. I appreciate the input, just not the answers I'm seeking. Spooky Times Ahead, MuHuHaHaaHaaaa.....
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,023
Messages
2,188,635
Members
78,647
Latest member
Kenney Elliott
Back
Top