7mm Best of the west reamer??

[dragman]

Does anyone have any info on this?? I understand that it is very similar to the standard 7mm but just a pinch different I would really appriciate any info thanks.

 

[TheSnake]

I thought they were using the 7mm STW some time ago but looks like they are using the standard 7 Mag now.

 

[kjcpoint]

7mm match, nighthawk custom reamer from Dave Kiff. Not sure if its best of the west, but the dimensions are the same as the gunwerks 7 mm's.

Kyle

 

[effendude]

I believe it is of standard 7mm Remington case dimensions, but throated longer to allow the VLD bullet to be out in the case a little farther, but still fit in mags.
Scott

 

[wapiti25]

GunWerks is chambering for the 7mm RemMag as one of their chambering. I have two hunting partners that have their rifles in 7mm Rem Mag. They are using std 7 mag Win brass with the 168 Berger bullet. I built my rifle with the 168 Berger seated at case neck shoulder junction. I'm not sure of the free bore GunWerks uses. They do offer other calibers on their rifles as well as ammo.

 

[Jim See]

At one time they were using a 3/4 degree lead angle in the 7 rm, not sure if they currently do but I would assume so as it was working very well for them.