Thank you
Friend has his up and running at the moment, he is shooting H1000 and 184’s with HBN.
Still need a bit of fine tuning but there seem to be a wide accuracy node (like Ben’s) on 2900 tot 2910 with 6/10 of grain giving 10fps differences.
Shot it out at 1000 yesterday but conditions were not great. 4Moa shift in wind between shots left and right at a stage. Vertical held just over half moa. Will try some different seating depths next.
Thank you for the infoWith regards to freebore. Kinda depends if you like jumping/jamming. I shoot almost entirely jammed so a 150 FB is okay. A 200 would be about perfect for me.
H4831sc is just ever so slightly slower than RL23 in my testing. You will most likely be a few FPS slower than if you used Rl23 but I have no doubt, you will find a superbly accurate load.
RL23 is actually probably a hair too fast but I’ve had such good luck with it I don’t plan on changing.
Friend has his up and running at the moment, he is shooting H1000 and 184’s with HBN.
Still need a bit of fine tuning but there seem to be a wide accuracy node (like Ben’s) on 2900 tot 2910 with 6/10 of grain giving 10fps differences.
Shot it out at 1000 yesterday but conditions were not great. 4Moa shift in wind between shots left and right at a stage. Vertical held just over half moa. Will try some different seating depths next.