7 saum?

[drdtmd]

hey guys might have missed it and not a good searcher but could someone tell me the neck diameter of a loaded rd in nosler brass no neck turn. I need to order a bushing for my dies coming. Thanks dave

 

[falconpilot]

.315 with a Berger 180 Hybrid. 1-Fired brass.....

Sorry, mine is Norma brass..

 

[drdtmd]

Thanks falcon. Anybody using nosler that can help me out?

 

[brxbrad]

Trophy Grade 168 gr accubond .315 from the factory.

 

[leadburner]

.315 Nosler & Norma.

 

[expiper]

I think Norma makes the Nosler brass ,,,so they should measure the same,,,,leadburner's measurements confirm that,,,Roger

 

[drdtmd]

Hey thanks guys. So my next question is what size bushing are you guys using for a no neck turn .313?

 

[falconpilot]

.313 would be a turn neck round, no???

Either way, I use a .311 for a .313 round

 

[drdtmd]

Im sorry for the confusion I ment 313 bushing for no neck turn? Does that sound right? Thanks

 

[falconpilot]

Yeap...I use 2 thousands neck tension..some will use more, some less...If you jam the 180's, you might want a little more, if you jump like I do, you might get away with only 1 thousands...

 

[drdtmd]

Thanks again falcon. So if I want 1 thou neck tension go with the .313 and if I want 2 thou neck tension go with a .312 because of about 1 thou spring back? Thanks

 

[100FUEGOS]

.314 wit secenar 180L Bushing 312