7 rem mag 145 Barnes lrx load help

[Mt.Boy]

Getting ready to start loading the 145 lrx. Anyone have any powder suggestions or pet loads. I have rl26 imr7828, h4831sc and rl 22. Wanting to try to rl26 first but not finding much data thanks

 

[Badhabit]

I tried them when they first came out with H1000 and RL26. Both shot around .625 . I did notice when I got to the upper end of RL26 it started barking pretty good.

 

[Mt.Boy]

I tried them when they first came out with H1000 and RL26. Both shot around .625 . I did notice when I got to the upper end of RL26 it started barking pretty good.

Thanks any idea where a good starting place would be for rl 26

 

[46and2]

For a bullet that light I'd try a faster burning powder. My vote would be Reloder23. My Sendero loved RL23 and 150gr Ballistic tips. I'm afraid Rel26 would soot up the bore and foul out too quickly.
Of the powders you have try 7828 or H4831SC.

 

[Flycaster1977]

I would start with 4831 and see how that works out. I load 140 barnes for a friend and im using imr 4955 with good results. Heres data from the hodgdon book.

 

[Flycaster1977]

Heres the data from alliant for rl26

 

[AckleymanII]

I have used IMR 4350 and R#19 with the std 140g ttsx with amazing accuracy and speed. Good luck!

 

[Mt.Boy]

I have used IMR 4350 and R#19 with the std 140g ttsx with amazing accuracy and speed. Good luck!

Thanks what kinda speed did u get with imr 4350

 

[Gb300wm]

RL22 is the powder of choice for me with this bullet. I ran 65.3 grains of it with 3125 fps velocity. It shot bugholes and was very consistent. Magnum primers

 

[Mt.Boy]

RL22 is the powder of choice for me with this bullet. I ran 65.3 grains of it with 3125 fps velocity. It shot bugholes and was very consistent. Magnum primers

Thanks for the info

 

[AckleymanII]

Thanks what kinda speed did u get with imr 4350

3200+ on a 26" factory barrel

 

[riverside jeep]

IMR-4831 has worked well for me with the LRX 145 as far as accuracy goes, 3000 f.p.s.

 

[warrbuk]

64.0 Of RL 22, it will pressure out higher but the accuracy was at 64.0

 

[S3silver]

3200+ on a 26" factory barrel

Older thread but just picked up a 26” barrel. What charge did you work up to? I have some H4350 and H4831.