7-6.5 PRC: N555 vs H4350

[gmr4]

can anyone give me an estimate for cbto for the 6.5-7prcw. I measured touch at 2.500 does this sound right?

It will be / could be different for each barrel - each measuring tool etc. I’d go to wheeleraccuracy.com and look at the videos 1) shoulder bump then 2) finding the lands or Cortina has a method on his site as well. I like to start with properly sized brass then do seating depth. Since I use the same reamer and great gunsmith both measurements are within .001 on each new barrel but I check each one.

 

[esromvre1]

It will be / could be different for each barrel - each measuring tool etc. I’d go to wheeleraccuracy.com and look at the videos 1) shoulder bump then 2) finding the lands or Cortina has a method on his site as well. I like to start with properly sized brass then do seating depth. Since I use the same reamer and great gunsmith both measurements are within .001 on each new barrel but I check each one.

Yep that's it in a nut shell