6xc Primer

[barnjoer]

What primer is anybody using for there 6xc loads? I am using burger VLB 115 grain bullets. H4350 powder.

 

[jr600yd]

Federal 210M, 210 and Wolf LR

 

[barnjoer]

Federal 210M, 210 and Wolf LR

No one has any Wolf! Says they have been discontinued

 

[jr600yd]

I've got some! Hehehe........

 

[barnjoer]

I've got some! Hehehe........

Not funny

 

[LitLBoy]

BR-2 works well with 7828SSC

 

[barnjoer]

Got 9 lbs of H4350 so going to have to figure out A load with it. Thanks John

 

[Hengehold]

Got 9 lbs of H4350 so going to have to figure out A load with it. Thanks John

I used 38.0gr of H4350 with a naked 115gr DTAC bullet in Norma 6XC brass with wolf and PMC primers. That was in a 30" barrel w/ avg vel of 2960fps.

I suspect that you would be in the same neighborhood of 38.0gr of H4350 with the 115gr VLDs.
-T

 

[barnjoer]

I used 38.0gr of H4350 with a naked 115gr DTAC bullet in Norma 6XC brass with wolf and PMC primers. That was in a 30" barrel w/ avg vel of 2960fps.

I suspect that you would be in the same neighborhood of 38.0gr of H4350 with the 115gr VLDs.
-T

Thank you very much!!

John

 

[JBT47]

Fed 210 (match), CCI BR2

 

[STOMP442]

I have been using plain jane CCI 200s in mine with excellent results.