6MMBR X Go Gauge Needed

[mikeinct]

I have a need for a 6MMBR X Go-Gauge....Buy Rent Borrow? Can anyone here help me out? I'm Mike in Ct

 

[rifleman700]

If you have a go gauge you don't need a no go gauge. Just a piece of scotch tape will work.

 

[mikeinct]

Thanks, I could just use a fired case.<<IF I HAD ONE>> It is a Savage...Shilen chambered this barrel..My Chamber cast looks right..but for some reason my cases come up short & the shoulders split on fire forming....mike

 

[DJSBRS]

I have a need for a 6MMBR X Go-Gauge....Buy Rent Borrow? Can anyone here help me out? I'm Mike in Ct

Do you have a Whitley or Crone reamer chamber? There is about .025 variation in the OAL case length.

DJ
DJ's Brass Service
205-461-4680

 

[mikeinct]

DJ I believe it is the older Crone design...You got a fired case ?? Help me out, Mike

 

[DJSBRS]

DJ I believe it is the older Crone design...You got a fired case ?? Help me out, Mike

Based on your pictures, WARNING!!!!! DO NOT SHOOT another round down that chamber!