6mmBr load work up ??

[rmist]

I have a new 6mmBr rifle, just picked up last month. It's a Bat, MBR stock, 28",krieger. I'm goingto the range this Saturday and need to load some rounds. I loaded some already all same seating depth at .010" jam. Using 450 primers and Varget powder. I loaded from 29.0 - 30.6 grs. Question is this going to be too hot? I'll look for pressure signs while going up in charges. Bullet is Berger 95gr VLD.
Thankyou

 

[chevytruck_83]

Start off with your loads of lower charge weight. Ive read that varget max loads vary pretty much from one lot to another.

 

[watercam]

You are in the right ball park. You should end up near the 30.0 range with 105s. Have fun!

 

[A j shooter]

I just broke in a Kreiger barrel in 6br . And my load shot best at 30.5 gr of varget . I worked up just like your doing and started a 29gr. Really didn't see no sign of pressure tho . Shot good I was shooting 105 hybrids

 

[djtjr]

You're in the right range I end up around 30 in most of mine shooting 105 amax or vlds and that's not too hot so with 95s you should be fine but as someone mentioned Varget lots can vary a bunch it's a great powder but always start low as you may see big gains or losses between lots, that siad if I could get the gun to shoot with one var lot I could get it to shoot the same with another even if the charge changes a bit lot to lot.

 

[brxbrad]

Use SRM Primers....Mine likes 30 gr Varget with 105's...You should be fine....

 

[rmist]

Thankyou all again. I'll load a few more on lower side then. Can't wait to shoot. Gonna be a heat wave here Saturday....50 !!!! Then back to freezing again.