6mm xc chamber dimension

[bankenfeld]

Hallo ,I would like to have some info for the chamber throat and neck dimension for the 6mm xc cartridge.I want a no turn neck but with tight tolerance.The brass that i intend to use is NORMA 6xc,and the bullet Sierra 95gr hpbt matchking.The throat should be so that the bullet just contact the lands with the bullet just not in contact with the neck-shoulder junction of the cartridge case.I did send Pacific tool and die an e-mail in this regard ,but they have not responded in the last few weeks.Please help

Thank you

Willem

 

[bankenfeld]

Hi , I am sure there must be someone that will be able to help me on this,Laurie,and German Salazar ,dont both of you shoot rifles in this caliber? please advise

Willem

 

[DCRYDER]

Mine has a .272" neck with .104" freebore. It's a PT&G by Kiff, with a live pilot.

It works fine with bullets from 107gr down to 75 grainers.