6mm Creedmoor Freebore

[JD1600]

Putting together a mid-range 6mm Creedmoor and planning to have a reamer made for the build. Intend to shoot Berger 105 gr. Hybrids in the rifle and undecided about the amount of freebore. Any recommendations?

 

[Huckleberry75]

There is a lengthy thread on Snipers Hide about it in the reloading depot. At least something to mull over. I did see where one guy mentioned that Dave Kiff of PTG said .130fb, others seem to have good luck with the .104fb. Just depends upon what bullet you are running. Beanland has my parts now for one, and I think his reamer is .104.....

http://www.scout.com/military/snipers-hide/forums/5533-reloading-depot/13229190-6mm-creedmoor

 

[JD1600]

There is a lengthy thread on Snipers Hide about it in the reloading depot. At least something to mull over. I did see where one guy mentioned that Dave Kiff of PTG said .130fb, others seem to have good luck with the .104fb. Just depends upon what bullet you are running. Beanland has my parts now for one, and I think his reamer is .104.....

http://www.scout.com/military/snipers-hide/forums/5533-reloading-depot/13229190-6mm-creedmoor

Thanks for the reply and will check out the thread. Plan on having a JGS reamer made for the rifle and would like the reamer cut for both use in a single shot as well as AI mags for other rifles. Plan on shooting 105 Berger Hybrids.

 

[jelrod1]

This is what I use.

 

[JD1600]

This is what I use.

Thanks!