6mm CreedMoor and Re#19

[Ironworker]

I've got a lot of Re#19 ,not much Re#16 . 6mm CM Berger 115 VLD hunting Peterson LRP brass.CCI 200 primers . Shall I burn Re#19 or Re#16 ? Have plenty of H4350 too.

 

[B23]

RL16 and H4350 tend to be very similar with RL16 generally having a slight edge in velocity. RL19 is a little slower so it'll take a bit more but it could make for a really good combination with those 115's. RL19 won't be nearly as temp stable as RL16 or H4350 but those two are very temp stable powders so not many are.

I use RL16 in my 6 Creed and it is a chootin SOB but I'm also shooting a much lighter bullet, 70gr Nosler BT, in mine. For a small bullet those little 70gr Nos BT's are a killer though. My daughter shot a 3x4 whitie at 175yds last weekend with it and that 70 BT's dumped him.

 

[JB10]

I settled on H4350 for 108 eldm. My rifle liked it better than R16.

 

[cb186]

H4350

 

[L.Sherm]

Another vote for R16 with the 115.
Mine was SRP Lapua brass with 450's

 

[jpjulian]

H4350 or RL17