6mm BR Norma die help

[AQC440]

I need to purchase A set of dies for 6mm BR, Norma ).272 neck.
My concern is when I locate them on a vendors website and use the 6mm benchrest link it always comes up 6MM BR REM. Full length size die. I want a FL size die, bushing type )for my Norma reamed 6 BR....Please help! I like the look of the Redding 6mm BR Rem type S Full Busing die. Will this work? Also any idea of a good starting point for a bushing size.

 

[rayjay]

If you buy new dies they are made for the Norma chamber. My Forsters said 6mmBR Rem and worked perfectly for my 2 6BR Norma/Lapua. I sent my Forster sizer back to Forster and had them hone the neck to .266 and it worked perfectly. When I was talking with Forster about honing the die I they told me they cut the dies to suit the Norma chamber. If you get a bushing die I would get .265, .266 and .267 bushings.

 

[Travelor]

Yes, the Redding dies you mention will work. Even though the dies are described as the Remington version of the 6mmBR they do yust fine.

The only diference in the two, as you probably know is about .040" in neck length.

 

[AQC440]

Thanks Guys....I'm on the net ordering Dies right now