6mm br loading
- Thread starter gambleone
- Start date
Preacher
Gold $$ Contributor
Your considering a good switch, and it's not any harder to reload than any other.
Depending on the neck diameter you may or may not need to turn the necks to fit your chamber.
For the most accurate loads a Wilson die along with a arbor press is your best bet for seating your bullets. A Harrells FL bushing die cut from your fired brass will be the best way to size your brass.
Depending on the neck diameter you may or may not need to turn the necks to fit your chamber.
For the most accurate loads a Wilson die along with a arbor press is your best bet for seating your bullets. A Harrells FL bushing die cut from your fired brass will be the best way to size your brass.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.